- Dowel pins DIN 7 manufacturers take you to know whether the pin hole is an important hole 2022-09-07
- Dowel pins DIN 7 manufacturers take you to understand the shape of the pins 2022-08-31
- Parallel pins GB119-86 manufacturers take you to understand the 4 uses of positioning pins 2022-08-24
- Introduction to the main functions of Parallel pins GB119-86 2022-08-17
- Open tail taper pin manufacturers take you to understand the differences between cylindrical pins and elastic cylindrical pins in use 2022-08-10
- How to install Open tail taper pin 2022-08-03
- Clevis pins ISO 2340 manufacturer will show you how to take out the broken cylindrical pin 2022-07-28
- Clevis pins ISO 2340 manufacturers take you to understand how the pins and holes fit together firmly 2022-07-20
- Cone pin with thread manufacturers take you to understand what the inner thread of the positioning pin does 2022-07-13
- Introduction to the installation method of Cone pin with thread 2022-07-06
Clevis pins ISO 2340 manufacturers take you to understand how the pins and holes fit together firmly
- Categories:Industry Information
- Author:
- Origin:
- Time of issue:2022-07-20
- Views:0
(Summary description)The manufacturer of Clevis pins ISO 2340 tells you that the pins and pin holes are suitable for both interference and transition fit. It mainly depends on the usage, whether it is positioning or limit.
Clevis pins ISO 2340 manufacturers take you to understand how the pins and holes fit together firmly
(Summary description)The manufacturer of Clevis pins ISO 2340 tells you that the pins and pin holes are suitable for both interference and transition fit. It mainly depends on the usage, whether it is positioning or limit.
- Categories:Industry Information
- Author:
- Origin:
- Time of issue:2022-07-20
- Views:0
The manufacturer of Clevis pins ISO 2340 tells you that the pins and pin holes are suitable for both interference and transition fit. It mainly depends on the usage, whether it is positioning or limit. Then there is the material of the parts. Each fit is different, which is related to the size and material of the parts.
Clevis pins ISO 2340 manufacturers tell you that the fit between the internal threaded pin and the pin hole is generally a transition fit, and the internal threaded pin at the tail is mainly used for occasions where it is inconvenient to disassemble, such as when the pin hole is a blind hole, then use the tail with internal threaded pins It is easy to disassemble.
The manufacturer of Clevis pins ISO 2340 tells you that the tolerance of the general cylindrical pin hole is H7. For example, for an 8mm pin, the pin hole should be Φ8H7.
5mm pin, 4.8 or 4.9 pin hole is not acceptable, take the size of the pin hole according to the above method.
In addition, the pin holes are generally matched, and the consistency is good. The manufacturer of Clevis pins ISO 2340 tells you that if the pin holes are made separately, the coordinate size requirements are very strict, ±0.01.
Scan the QR code to read on your phone
Consult now
Real-time information
Search online
Persist in doing things right once, and try our best to provide customers with better products and services.
contact us
cell phone:+86-18964326553
+86-13795260638
Landline:021-68266553(Shanghai)
+86-021-68267318(Outside China)
address:No. 466, Xuanxia Road, Sanzao Industrial Park, Pudong New Area, Shanghai
Mail:wangxz@sh-dongbiao.com(Shanghai)
xjy@sh-dongbiao.com(Outside China)
sale@sh-dongbiao.com
WeChat scan
Shanghai Shi-huan Pin Fastener Co., Ltd 沪ICP备10208594号-2 Powered by www.300.cn